Order Tray | Contact Us | Home | SIG Lists

[aprssig] Kam Plus Control Programs?

Stephen H. Smith wa8lmf2 at aol.com
Thu Mar 22 04:00:19 UTC 2007


kf8zn at yahoo.com wrote:
> I am trying to get Back into Packet after a 20 year hiatus...sigh...
> I have a Kantronics KAM PLUS with the 8.2 Firmware, which research 
> indicates supports APRS???
>  
> Question: The Pacterm Program is SO DAMNED CRYPTIC in terms of the 
> Command Structure. Are there any Menu Driven Terminal Programs that 
> will Access all the Functions and be a little more user friendly??
>  
> Any Help Appreciated.
>  
> KF8ZN
>
> ------------------------------------------------------------------------

The Pacterm program is completely useless for APRS (except perhaps for 
setting the digipeater configuration if you choose to use it).  APRS is 
completely different in it's conventions, path usages, protocols, etc 
from traditional connected packet.  You need to use an APRS-specific 
application such as UI-View, APRSplus, WinAPRS, APRSpoint, etc. 

For an introduction to some of the differences between classic packet 
and APRS usage (which EXCLUSIVELY uses non-connected non-acked 
one-to-many broadcast-like "UI Frames") see the intro on my website:


"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://wa8lmf.net/DigiPaths




--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com  --OR--   http://wa8lmf.net

NEW!   World Digipeater Map
  http://wa8lmf.net/APRSmaps

JavAPRS Filter Port 14580 Guide
  http://wa8lmf.net/aprs/JAVaprsFilters.htm



Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20070321/e711f250/attachment.htm 


More information about the aprssig mailing list