[aprssig] RE: >>>TNC digi settings<<<

[Richard Sharp, KQ4KX]

Actually, it was Dave (KG4YZY) who did the testing.  He was using a Kenwood
TM-271A and KPC3+ into dummy load with sample port and two D700s.  The
reason for the slower decoding is the D700 uses squelch CD instead of
software CD.

 

Richard

 

  _____  

From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Wes Johnston, AI4PX



 

What's the vintage of the transmitter?

Wes

 

On 3/26/07, Robert Bruninga <bruninga at usna.edu> wrote: 

Richard Sharp, KQ4KX has done some testing and concludes that
the better setting of TXD for his digipeaters is with a TXD of 
180ms.  His testing with a TXD of 150ms at his digipeater
measured about 9% of packets were not decoded.  At 170ms just
over 2% weren't decoded.  180ms and above was 100%.
He was using a D700 for his test receiver. 

For what it's worth.
Bob, WB4aPR

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tapr.org/pipermail/aprssig/attachments/20070326/7ef2118e/attachment.htm