[aprssig] Programming my Kenwood TH-D7AG for ISS Packet??

[Derek Koonce]

Bob,
Since Kenwood has free software for programming radios, would it not be 
a good idea to have some sample configuration files loaded up on your 
web site? I have not checked, but just asking in advance.
Derek Koonce
KE6JTP


gerheim at cox.net wrote:
> BTW, if you _do_ have to do APRS with split freq, it's probably easier to program a non-standard split and use band A than to use A/B duplex.  
>
> Outside of GO-32, I think the whole shootin' match will be on 144.39 or 145.825.  
>
> I set the path to ARISS, SATGATE, WIDE, then add or delete the "WIDE3-3" at the beginning.  It saves typing.  
>
>
> ---- Robert Bruninga <bruninga at usna.edu> wrote: 
>   
>>> I am trying how to program my TH-D7AG for the ARISS Packet
>>>
>>> Set data TX on Band B to 145.990  
>>> Set RX on Band A to 145.800 
>>>       
>> No, ARISS is currently on 145.825 up and down.  So set for TX/RX
>> both on band A and set A to 145.825.
>>
>>     
>>>  Also the Path ARISS What is the PATH?
>>>       
>> The menu item APRS-PACKET_PATH set it to ARISS.
>>
>>     
>>> Go to Message GROUP and add the wildcard * 
>>> star with the astrick.
>>>       
>> Add it to the beginning as "*, " or on the end as ",*".  Without
>> the quotes of course...
>>
>> I assume you are working noremal APRS on 144.39 in North
>> America?  If so, then only the changes above are needed to hear
>> the ISS (if and when it is on)...
>>
>> Bob, Wb4APR
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>     
>
> --
> -Al Gerheim, K1QN
>
> HP-49G+ Software Page:
> http://members.cox.net/above
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>