Order Tray | Contact Us | Home | SIG Lists

[aprssig] Programming my Kenwood TH-D7AG for ISS Packet??

Robert Bruninga bruninga at usna.edu
Sat Nov 3 00:27:13 UTC 2007


> Since Kenwood has free software for programming radios, 
> would it not be a good idea to have some sample 
> configuration files loaded up on your web site? 

I don't thik so.  Configuring for APRS is really very simple.
Just set your callsign, and your path.  That is all there is to
it.  There are so many things you can do with APRS that usually
one answer is not right for everyone.  Much easier just to learn
how to set your path.

Once you can do that, then you can do anything with APRS  I
guess... Eventuallly,,,

Use WIDE2-2 on the ground.  Use the path of ARISS via the
satellites.  Use via 4XTECH via GO32...

Bob


> gerheim at cox.net wrote:
> > BTW, if you _do_ have to do APRS with split freq, it's 
> probably easier to program a non-standard split and use band 
> A than to use A/B duplex.  
> >
> > Outside of GO-32, I think the whole shootin' match will be 
> on 144.39 or 145.825.  
> >
> > I set the path to ARISS, SATGATE, WIDE, then add or delete 
> the "WIDE3-3" at the beginning.  It saves typing.  
> >
> >
> > ---- Robert Bruninga <bruninga at usna.edu> wrote: 
> >   
> >>> I am trying how to program my TH-D7AG for the ARISS Packet
> >>>
> >>> Set data TX on Band B to 145.990  
> >>> Set RX on Band A to 145.800 
> >>>       
> >> No, ARISS is currently on 145.825 up and down.  So set for
TX/RX
> >> both on band A and set A to 145.825.
> >>
> >>     
> >>>  Also the Path ARISS What is the PATH?
> >>>       
> >> The menu item APRS-PACKET_PATH set it to ARISS.
> >>
> >>     
> >>> Go to Message GROUP and add the wildcard * 
> >>> star with the astrick.
> >>>       
> >> Add it to the beginning as "*, " or on the end as ",*".
Without
> >> the quotes of course...
> >>
> >> I assume you are working noremal APRS on 144.39 in North
> >> America?  If so, then only the changes above are needed to
hear
> >> the ISS (if and when it is on)...
> >>
> >> Bob, Wb4APR
> >>
> >>
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at lists.tapr.org
> >> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >>     
> >
> > --
> > -Al Gerheim, K1QN
> >
> > HP-49G+ Software Page:
> > http://members.cox.net/above
> >
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >   
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 





More information about the aprssig mailing list