Order Tray | Contact Us | Home | SIG Lists

[aprssig] Voice Repeater NO-TONE

Stephen H. Smith wa8lmf2 at aol.com
Mon Nov 5 04:42:07 UTC 2007


Bob Bruninga wrote:
> Regarding NO-TONE:
>
> The D710 needs to parse it so that when you see someone with their frequency and tone, then pushing the TUNE button will tune the radio immediately to that station.
>
> RIght now the D710 does not adjust the tone, but that was because we still had not standardized on the TNNN at the time.  Now I hope  they will see that we can get a standard going so that the radio will parse it.
>
> Bob, WB4APR
>
>   
Now THAT is really is forward-looking thinking.   Cool.....


Now to throw a monkey wrench into the works:

How do we accomodate DCS (Digital Coded Squelch) a.k.a DPL ("Digital PL 
- Motorola) a.ka. DCG (Digital Channel Guard - GE) a.k.a DCTS (Digital 
Coded Tone Squelch - Icom) into this scheme???  

More and more of the newer radios can now encode/decode the 100+ DCS 
codes that actually superimposes a continuous stream of digital data, at 
about 131baud, on the transmitted signal instead of a simple sine wave 
single CTCSS tone.   Sooner or later, we are going to see repeaters 
going to DCS.  Though most likely mostly closed systems with a small 
group of hard core "techie" members.



--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com  --OR--   http://wa8lmf.net

NEW!   World Digipeater Map
  http://wa8lmf.net/APRSmaps

JavAPRS Filter Port 14580 Guide
  http://wa8lmf.net/aprs/JAVaprsFilters.htm

"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://wa8lmf.net/DigiPaths

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:






More information about the aprssig mailing list