Order Tray | Contact Us | Home | SIG Lists

[aprssig] Voice Repeater NO-TONE

Chuck Kimball n0nhj at yahoo.com
Mon Nov 5 11:34:52 UTC 2007

How about instead of T for tone, D for digital and the 3 digit DPL code
i.e. D023

And just 1750 for the burst tone repeaters.  No Prefix at all.  

T000   or T088,  T100  etc.
D023, 025,026,031 etc.

Chuck  n0nhj

----- Original Message ----
From: Stephen H. Smith <wa8lmf2 at aol.com>
To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
Sent: Monday, November 5, 2007 1:42:07 AM
Subject: Re: [aprssig] Voice Repeater NO-TONE

Bob Bruninga wrote:
> Regarding NO-TONE:
> The D710 needs to parse it so that when you see someone with their
 frequency and tone, then pushing the TUNE button will tune the radio
 immediately to that station.
> RIght now the D710 does not adjust the tone, but that was because we
 still had not standardized on the TNNN at the time.  Now I hope  they
 will see that we can get a standard going so that the radio will parse
> Bob, WB4APR
Now THAT is really is forward-looking thinking.   Cool.....

Now to throw a monkey wrench into the works:

How do we accomodate DCS (Digital Coded Squelch) a.k.a DPL ("Digital PL
- Motorola) a.ka. DCG (Digital Channel Guard - GE) a.k.a DCTS (Digital 
Coded Tone Squelch - Icom) into this scheme???  

More and more of the newer radios can now encode/decode the 100+ DCS 
codes that actually superimposes a continuous stream of digital data,
about 131baud, on the transmitted signal instead of a simple sine wave 
single CTCSS tone.   Sooner or later, we are going to see repeaters 
going to DCS.  Though most likely mostly closed systems with a small 
group of hard core "techie" members.


Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com  --OR--   http://wa8lmf.net

NEW!   World Digipeater Map

JavAPRS Filter Port 14580 Guide

"APRS 101"  Explanation of APRS Path Selection & Digipeating

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:

aprssig mailing list
aprssig at lists.tapr.org

More information about the aprssig mailing list