[aprssig] RE: WRT54G
danny at messano.net
Mon Nov 19 14:21:03 CST 2007
The WRT54GL is the (L)inux version and has a lot more RAM and is even more
customizable than the WRT54Gv4 was. It will support things like USB and
adding either SD or CF cards (I don't remember which). These are still
being made and supported.
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Alex Carver
Sent: Monday, November 19, 2007 1:36 PM
To: aprssig at lists.tapr.org
Subject: [aprssig] RE: WRT54G
> Message: 10
> Date: Mon, 19 Nov 2007 09:58:50 -0800 (PST)
> From: "Curt, WE7U" <archer at eskimo.com>
> Subject: RE: [aprssig] WRT54G
> To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
> <Pine.SUN.4.58.0711190957171.24326 at eskimo.com>
> Content-Type: TEXT/PLAIN; charset=US-ASCII
> On Mon, 19 Nov 2007, Michael Hatzakis Jr MD wrote:
> > I don't see any serial port on the wireless G
> router, WRT54G or GL/GS, and
> > have checked the versions on Linksys web site, can
> someone show me where
> > that port is?
> You have to open it up and add a connector, including drilling holes
> in the case to mount it.
> If I remember correctly the second port requires the addition of a
> MAX232 chip and some caps, plus of course yet another connector.
You do remember correctly. :)
The first serial port is a full fledged serial port (TX/RX plus RTS/CTS and
other control signals). The second serial port is a kludge of sorts using
the GPIO (general purpose input/output) pins to twiddle the
MAX232 chip. This second serial port is a two wire port only, it will not
have any form of control signals. It will also require a specialized driver
to make it work. The first serial port is supported directly by the kernel
as a true port.
The WRT54G version 4 is the last version that supports OpenWRT. After that,
Linksys went with a proprietary bootloader and OS that precludes installing
But seeing the recommendation for the Asus WL500, I might just have to pick
one up and play with it. The WRT54G negotiates 100 Mbit connections and has
theory) a 100 Mbit switch but the Broadcomm chip used on board can't push
speeds beyond 10 Mbit full duplex.
I've been thinking of replacing it with something that can. Then again,
I've been thinking of replacing it with a full computer that can do layer 7
routing, but that's just me. :)
Be a better pen pal.
Text or chat with friends inside Yahoo! Mail. See how.
aprssig mailing list
aprssig at lists.tapr.org
More information about the aprssig