[aprssig] Latest setup of KPC3 and 3+

[Michael J. Wolthuis]

I have used the nwaprs.info site for a long time as our settings here,
however, it is not updated with Bob's latest submissions of how to identify
a digi in the beacon text.  I was hoping for something the same, but with
Bob's new updates.  I am working to make a near copy of the nwaprs.info page
with updates for our state.

Thanks!
Mike


-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Keith VE7GDH
Sent: Thursday, November 29, 2007 1:31 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Latest setup of KPC3 and 3+

Mike (callsign?) wrote...

> Where can I find, based on Bob's recommendations of late
> regarding SSn-n, etc, the correct KPC3 / 3+ setup for redoing
> all our TNCs going into 2008?

The "new" settings were actually adopted in the "Pacific Northwest" a year
or so before it became the "new paradigm" so taking a look at
www.nwaprs.info might be worthwhile. It doesn't go into the "why" as deeply
as on Bob's site, but it has some very easy to understand suggestions for
the settings.

As Bob suggested, a search for "fix14439.html" should take you to
http://web.ew.usna.edu/~bruninga/aprs/fix14439.html.

Consider adding an object to advertise the local voice repeater if the 
coverage of the digi is about the same as the voice repeater. It should go 
out direct in the beacon text every 10 minutes. There is an example on 
www.nwaprs.info/widen-n.htm.

73 es cul - Keith VE7GDH
--
"I may be lost, but I know exactly where I am!"


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig