[aprssig] Ram Mount w/D700 control head

[William McKeehan]

A few other people suggested similar things. This reference includes very good
photos that make it really clear to me.

Thanks for all of the responses!
-- 
William McKeehan
KI4HDU
http://mckeehan.homeip.net

On Wed, September 26, 2007 1:18 pm, K7FTP wrote:
> We did in our Project Jeep.  RAM Mounts are great.
> We have one for the TM-D700A and one of their
> laptop mounts in our Project Jeep.  We have used
> their GPS mounts too.
>
> This article goes into detail on setting up their mount
> with the TM-D700A.
>
> http://www.commtechreview.net/jeep/rammount1.htm
>
> ----- Original Message -----
> From: "William McKeehan" <mckeehan at mckeehan.homeip.net>
> To: <aprssig at lists.tapr.org>
> Sent: Wednesday, September 26, 2007 10:31 AM
> Subject: [aprssig] Ram Mount w/D700 control head
>
>
> Anyone using a Ram Mount (http://www.ram-mount.com/) for their Kenwood
> TM-D700
> control head? If so, can you tell me which mount you are using and what
> additional fabrication had to be done?
>
> I'd like to get a setup that would mount eh D700 control head and a Garmin
> GPS
> V (preferably with the GPS V just above the control head) for use on my
> motorcycle (2006 GoldWing).
>
> Any suggestions are welcomed!
> --
> William McKeehan
> KI4HDU
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>