[aprssig] GO-32 in safe mode...
Francisco Rogerio Fontenele Aragão
frfaragao at gmail.com
Fri Oct 12 20:53:04 CDT 2007
GO-32 was again on over Brazil from 2342 to 2358 ( Oct 12.). I was able to
get beacon answer and msg answer using my D7 and antenna AL-800.
73, Francisco, PT2TD
2007/10/12, Robert Bruninga <bruninga at usna.edu>:
> > I can hear bursts of 9600 baud in the downlink
> > at the right time, right freq, and right doppler.
> > It's a little troubling that I can't decode anything.
> Apparently GO-32 has crashed its software and is in a safe mode.
> It is transmitting a single burst of 9600 baud every 30 seconds,
> but it is not decodable on a monitoring TNC, because the PID in
> that safe mode packet is non-standard. (Im guessing here)
> This is why you can monitor the 9600 baud downlink and not have
> megabytes of packets overflowing your monitor, because all BBS
> traffic is sent with a different PID than normally used for
> conventional UI packets. But all beacons, bulletins and APRS
> packets are all using the standard PID.
> (Protocol Identification Byte).
> So we are kind of in standby until GO-32 software is reloaded...
> Hang in there...
> Bob, WB4APR
> > tried to use my old HP95LX as a dumb terminal from my mobile
> > this AM. Nothing.
> > ---- John Vause <jdv at iglou.com> wrote:
> > > _______________________________________________
> > > aprssig mailing list
> > > aprssig at lists.tapr.org
> > > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> > --
> > -Al Gerheim
> > HP-49G+ Software Page:
> > http://members.cox.net/above
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> aprssig mailing list
> aprssig at lists.tapr.org
Francisco Rogerio F. Aragão
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig