[aprssig] Latest on UIVIEW/GO-32/D7

[gerheim at cox.net]

... if you do it right, it can even compensate for doppler.  All with the same D7.  

---- gerheim at cox.net wrote: 
> I've been fooling with the script.  I just decoded a buncha stuff from the GO-32 pass at 00:30Z on the east coast.  No APRS packets.  
> 
> >>>Send some UP!!!<<<
> 
> The next problem will be getting the script to set up for split band data transmissions.  (2M up, 70CM down, both at 9600 baud).  
> 
> I also have scripts for terrestrial (144.39) APRS, and PCSAT (145.825).  Child's play!  So you can wire up one D7, and change modes with a couple of keyclicks, and no keypad entries.  (the really perverse programming task would be to link this up with a satellite tracker.  You could break off the terrestrial IGATE, and automatically turn it into a properly-configured SATGATE when the time was right.)  
> 
> When it's all polished up, I'll post them somewhere.  You add the files to your UIVIEW/CMD dirrectory.  It'll modify the drop-down menu to show whatever is in the directory with the right extension.  Very clever!  
> 
> 
> ---- Keith VE7GDH <ve7gdh at rac.ca> wrote: 
> > Al (callsign) wrote...
> > 
> > > I have a script which sets the band, freq, data band, and baud rate
> > > (9600) then... no matter what I do, after the script is executed, UI-View
> > > restarts the TNC, which sets the baud rate back to 1200.
> > > I think I can manually set the baud rate via the "Terminal" screen.
> > 
> > Have you edited the TH-D7.CMD file for UI-View? It will set the radio to
> > "band A", set the frequency for the D7 and make other changes to the TNC. At
> > a glance, I don't see anything in the default file that looks like it
> > changes the TNC to 1200, but perhaps its there and I just don't recognize
> > it. I don't have a D7, but perhaps a command could be added to the file to
> > have it set it the TNC to 9600 if that's what you need.
> > 
> > I see the TM-D700.CMD file has the command "HBAUD 1200" in it. Would it be 
> > as simple as adding "HBAUD 9600" to the D7 command file?
> > 
> > 73 es cul - Keith VE7GDH
> > --
> > "I may be lost, but I know exactly where I am!"
> > 
> > 
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> --
> -Al Gerheim K1QN
> 
> HP-49G+ Software Page:
> http://members.cox.net/above
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

--
-Al Gerheim

HP-49G+ Software Page:
http://members.cox.net/above