Order Tray | Contact Us | Home | SIG Lists

[aprssig] paccom schematic

Nick Pugh quadpugh at bellsouth.net
Sat Sep 1 09:54:49 UTC 2007

Yes the tones are clean and not distorted. The high tone is about 6 db lower 
in amplitude the low frequency tone.

----- Original Message ----- 
From: "Ray Wells" <vk2tv at exemail.com.au>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Friday, August 31, 2007 4:15 PM
Subject: Re: [aprssig] paccom schematic

> Nick Pugh wrote:
>> I have a Pacomm Picopacket It will tx ox but is decoding 1 out of 4 rx 
>> packets The input level is set to about 300 mv pp
>> does the group have any suggestions??
>> nick
>>aprssig mailing list
>>aprssig at lists.tapr.org
> Have you looked at the audio to the TNC with a CRO to see what the tones 
> look like? That's the first thing I would do.
> Ray vk2tv
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig 

More information about the aprssig mailing list