[aprssig] ISS and path settings

[Robert Bruninga]

Be sure to use a special SSID for your satellite experiments.
Because as soon as you return to 144.39, then the APRS-IS will
pick you up and overwrite your satellite success.  Bob 

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org 
> [mailto:aprssig-bounces at lists.tapr.org] On Behalf Of KEVIN
KIBBE
> Sent: Tuesday, September 11, 2007 8:15 AM
> To: TAPR APRS Mailing List
> Subject: [aprssig] ISS and path settings
> 
> 
> 
> Yesterday was my first ISS digi. This morning the first pass
> of my day I changed the path address back to wide1-1,wide2-1 
> to see how that
> would work. Yesterday I had my path set to ARISS which 
> enabled me to show up on
> the findu ariss web page which I thought was rather neat. But 
> today I looked
> for my self to show up and didn't see anything . (I did 
> notice that one guy was
> transmitting every 10 seconds.)
> 
> 
>  
> 
> 
> But then I went back to the normal findu web site for APRS
> and there I was! A nice ham with a sat gate, N0AN had heard 
> me and linked me
> back to the normal APRS system. In my inbox I also saw that I 
> had two messages
> so everything is working fine.
> 
> 
>  
> 
> 
> Perhaps most ISS users know this, to show up on the findu
> ISS web page you do have to use ARISS and not the new widen-N 
> at least in my
> little experiment. But if you do use the new widen-N you will 
> still get gated. 
> 
> 
> 
>  
> 
> 
> Kevin
> 
> 
> VA3SU
> 
> 
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>