Order Tray | Contact Us | Home | SIG Lists

[aprssig] Need Path Mentoring

Kai Gunter Brandt kai.brandt at hjemme.no
Tue Sep 25 15:45:39 UTC 2007

Jan T. Pharo skrev:
> "Robert Bruninga" <bruninga at usna.edu>, Thu, 20 Sep 2007 18:04:21
> -0400:
>> Your D700 can have 5 different permanently saved paths. One in
>> Each PM.  If you shift around from PM to PM, you might be
>> inadvertantly using some paths you did not intend to use.
> Oh?
> I can store different other settings in different PMs, but I have
> tried to store different paths with different PMs and did not succeed;
> this is a problem when passing country borders (or going into regions)
> where the expected unproto paths are different. Like, when I recently
> were to a long weekend in Germany (DL), I were driving through SM and
> OZ, and OZ doesn't support WIDEn-N at all, but only (RELAY,)TRACEn-N,
> and in Sweden the digis seem to support both systems (as I could see
> my track in aprs.he.fi while using the danish setup). It had been a
> good thing to only switch PM to use the new setting set. So I might
> have been trying it in a wrong way, but I didn't manage to do it. So I
> changed the setting manually (and back again when coming home).
Works perfect on both my TM-D700
I think the different versions of the TM-D700 all suports different 
paths in the PM

First select i.e PM1
Change everything regarding APRS menus
Enable the APRS/tnc mode
Store the PM1

Then select i.e PM2
Change everything regarding APRS menus
Enable the APRS/tnc mode
Store the PM2

I have one setup for APRS on 144.800 and another one when doing APRS via 
i.e ISS

73 de LA3QMA

More information about the aprssig mailing list