[aprssig] Loopback 127.0.0.1

[Andrew Rich]

Ta,

What I am trying to get my head around is how to get a whole lot of sources 
feed to a common point, and then feed to a lot of listeners.

Much like the APRS-IS

the loopback seemed a good place to start ?

I am unsure if you can bind more than one socket to a port number tho...



----- Original Message ----- 
From: "Scott Miller" <scott at opentrac.org>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Tuesday, April 01, 2008 11:49 PM
Subject: Re: [aprssig] Loopback 127.0.0.1


> You can talk to yourself on 127.0.0.1.  Lots of stuff does that.
>
> Scott
> N1VG
>
> Andrew Rich wrote:
>> Gudday
>>  What happens if I aim data at 127.0.0.1 from a perl script.
>>  Then fire up a service listening on 127.0.0.1
>>  Can you use this address as a data multiplexer ?
>>  Andrew Vk4TEC
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>