[aprssig] Suggestion for APRS over Satellite
scott at opentrac.org
Tue Apr 22 09:10:34 CDT 2008
I used to run orbital prediction software on my Palm III. Certainly an
ARM7 class device can do it, even if it might take several seconds to
calculate. But all you have to do is run it once, get your next AOS,
and go to sleep.
That said, I don't want to be the one to have to write embedded orbital
Maybe there's some easier way of broadcasting pre-computed ground track
and footprint data? It wouldn't need to stay valid or accurate for
long, maybe just a couple of passes at a time.
Stephen H. Smith wrote:
> Hans Johnson wrote:
>> Hi All,
>> I've been toying around with the idea of building some equipment for
>> extreme remote telemetry stuff to be done over satellite. (Similar to
>> Bob's project in Mongolia).
>> Anyhow, one of the things that would be extremely useful is if the
>> satellite could (occasionally) include its current orbital data in the
>> beacon packet, something like a condensed version of the Two Line
>> Element and a CRC. Using this information, it could then power down
>> the radio until the next useful satellite pass. This would
>> drastically reduce the power requirements for a remote site. Also,
>> things like asatlogger and what not could use the information to
>> update their pass predictions automatically.
> Won't the remote device then need to have fairly hefty computing power
> to crunch the orbital elements into a useful AOS/LOS prediction for the
> particular location the device is located at?
> I would guess that the power consumption of a controller with enough
> horsepower to do this would exceed the total power consumption of just
> having a much simpler dumber device power up the radio for a few seconds
> every 5 or 10 mins if the transmit bursts are really short.
> Not to mention you will also need to power a receiver that won't be
> needed with a "dumber" device, and a real-time clock to wake up the
> controller/transmitter at the appropriate times.
> Stephen H. Smith wa8lmf (at) aol.com
> EchoLink Node: 14400 [Think bottom of the 2M band]
> Home Page: http://wa8lmf.com --OR-- http://wa8lmf.net
> NEW! World Digipeater Map
> JavAPRS Filter Port 14580 Guide
> "APRS 101" Explanation of APRS Path Selection & Digipeating
> Updated "Rev H" APRS http://wa8lmf.net/aprs
> Symbols Set for UI-View,
> UIpoint and APRSplus:
> aprssig mailing list
> aprssig at lists.tapr.org
More information about the aprssig