[aprssig] KPC3 digi

[Robert Bruninga]

> Bob's got it on his website here:
> http://web.ew.usna.edu/~bruninga/aprs/WIDE1-1settings.txt

And, thanks to Cap, I just now updated it to include settings
for setting up Uiview home stations as WIDE1-1 digipeaters in
those rare areas where the home station may be valuable as a
fill-in digi.

Bob, WB4APR
> 
> Regards,
> Dave
> KG4YZY
> www.aprsfl.net
> 
> 
> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org 
> [mailto:aprssig-bounces at lists.tapr.org]
> On Behalf Of Robbie, wa9inf
> Sent: Tuesday, February 05, 2008 5:53 PM
> To: TAPR APRS Mailing List
> Subject: [aprssig] KPC3 digi
> 
> Hi guys,
> 
> I can not find my copies, (I did have them, I think) of the
setup 
> parameters for a simple WIDE1-1 fill-in digipeater using the 
> famous KPC3 
> as a stand alone digi..
> 
> Can some of you direct me to a good source, I've been finding 
> a lot of 
> out dated pages that seem to be abandoned and all are using 
> RELAY, WIDE, 
> TRACE and the like..
> 
> Thanks in advance..
> 
> Robbie
> 
> 
> 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>