[aprssig] PK-12 help please
Folgedalen, Robert L robert.l.folgedalen at boeing.comSat Feb 9 22:13:53 UTC 2008
- Previous message: [aprssig] PK-12 help please
- Next message: [aprssig] PK-12 help please
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hello Bob. Very pleasantly surprised to hear from the Master himself! You were correct - my unproto string was wrong. I have revised it to what I thought it was. Now: UN GPSMV via wide1-1,wide2-1 Result I am seeing on this web site: http://aprs.fi/?c=raw&call=k7ioc-9&limit=50 2008-02-09 22:05:14 UTC: K7IOC-9>GPSMV,WIDE1-1,WIDE2-1,qAo,N7JGX-10:K7IOC [Unsupported packet format] 2008-02-09 22:05:19 UTC: K7IOC-9>GPSMV,SEA*,WIDE2-1,qAO,WA7QFR:K7IOC [Unsupported packet format] 2008-02-09 22:09:14 UTC: K7IOC-9>GPSMV,WIDE1-1,WIDE2-1,qAo,N7JGX-10:K7IOC [Unsupported packet format] Still seeing the "[Unsupported packet format]" apparently coming from the gps rx. More details in my original note. Regards, Lee K7IOC -----Original Message----- From: Bob Bruninga [mailto:bruninga at usna.edu] Sent: Saturday, February 09, 2008 1:32 PM To: TAPR APRS Mailing List Subject: Re: [aprssig] PK-12 help please > I have an AEA PK-12 TNC. > TNC instructions are: > MY K7IOC-9 > UN GPSMV VIA WIDE1-1,WIDE2-1 But that is not what you are getting. Look below. You are getting a TOCALL of GPSMV and also the first hop of GPSMV, so there is something wrong with your setup. > > The result of the above according to a local web site was: > 2008-02-03 18:44:14 UTC: > K7IOC-9>GPSMV,GPSMV,WIDE1-1,WIDE2-1,qAo,N7JGX-10:K7IOC Check your unproto command again. Bob _______________________________________________ aprssig mailing list aprssig at lists.tapr.org https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
- Previous message: [aprssig] PK-12 help please
- Next message: [aprssig] PK-12 help please
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
