Order Tray | Contact Us | Home | SIG Lists

[aprssig] FREQUENCY on APRS

Keith VE7GDH ve7gdh at rac.ca
Sun Jan 13 00:48:38 UTC 2008


James KB7TBT wrote...

> This was the basis for my question, does it handle it correctly,
> not only placing the correct formatted text so the other radios
> can be interpreted by it properly, but all around.

If you create an object in UI-View, it will convey the frequency 
embedded in the name ofo the object, the position, the symbol that you 
chose and other informationt that you add to the beacon comment such as 
the tone frequency, callsign, name of town or whatever. It will be a 
proper object.

> The path is an issue, a downside is you cannot chose a path for
> the objects in uiview {not that I have found}. The only other choice
> for most will be implementing a beacon from a local digi.

It will go out using the path specified in your station setup. As 
repeater objects are meant for local use, they should go out with no 
path at all. If your station doesn't have approximately the same 
coverage as the repeater, pehaps you aren't the best station to send the 
object. Ideally, an APRS digipeater at the repeater site would be 
generating the object.

On the other hand, if you are within earshot of only one digi, and if 
the frequency is very quiet there, and if the coverage of that digi is 
about the same as the voice repeater, go for it. I would really 
recommend having the digi create the object instead, but if you can't 
get to the digi, or if you aren't the owner and the owner refuses to 
create the repeater object, you could do it from there. It's just not 
the ideal way to do it.

> Unfortunately beacons from a digi will never contain ALL the area 
> information and will be subject to bias and not rationality.
> Looking for a better way:

Huh? What does that mean?

73 es cul - Keith VE7GDH
--
"I may be lost, but I know exactly where I am!" 





More information about the aprssig mailing list