[aprssig] D-710A Question
mcheavens at usa.net
Tue Jan 29 10:22:11 CST 2008
Since nobody answered the question that you posted, I now have the
answer that you were looking for.
The 6 pin DIN "Data" port IS active at all times and WILL allow the
input/output of audio on the port when in APRS mode.
After playing with the radio this weekend it is now possible to have
smart beaconing with NO modifications to the radio!
I hope this answers the question.
Now for the Next question:
Does anyone have the pin-out for the RF Deck to Control head? RJ-45 cable.
This control head is VERY cool, and I have another project that I
would like to use it for, but I need the pinout and the control protocol!
At 06:51 PM 1/18/2008, you wrote:
>Here's one for you D-710A experts out there..
>When the radio is in APRS mode, is the data terminal on the back of
>the radio active as well? Can that jack be used for injecting data and
>keying the radio while in APRS mode? What I want to do is use a
>TinyTrak3 to control the transmit instead of the built-in algorithms.
>Thanks and 73,
>Rory Burke - K5MBH
>aprssig mailing list
>aprssig at lists.tapr.org
More information about the aprssig