[aprssig] Has anyone else seen this?

[Rory Burke]

It's not a problem of the D710 not decoding - it's a problem of the  
FIRST beacon sent manually  FROM the D710 not being decoded by other  
stations. The second and subsequent manual beacons are decoded every  
time.  I have not yet been able to determine how long I must wait  
before the cycle repeats, but some quick tests this morning indicate  
that it's not very long.

73 - Rory
K5MBH

On Jan 30, 2008, at 12:10 PM, John Habbinga wrote:

> This doesn't sound like a transmitting problem.  It sounds like the  
> receiver has a battery save feature enabled.  Turn off the battery  
> save feature and it should decode the first time, everytime.
>
>> When I press the Beacon button the beacon is sent immediately with  
>> no TXD, and the beacon is not able to be decoded (I suspect because  
>> it is being truncated). If I immediately press the button again the  
>> beacon  is sent a second time with the proper TXD. I can press the  
>> Beacon  button as many times as I like and the proper TXD is  
>> imposed. If I  stop pressing the Beacon button and wait for several  
>> minutes, then  press it again the problem repeats itself. It is  
>> only the first beacon  after a period of inactivity that is  
>> truncated.
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig