[aprssig] AGWDigi stripping ???

Phillip zl2tze at yahoo.com.au
Wed Jul 23 15:37:23 CDT 2008

       Max and myself have been trying to sort out 2 things that appear to
be wrong within AGWDigi 
over the last few weeks this has driven both Max and myself around several
corners and added a few
more grey hairs.

1/ No pathing data is passed by AWGDigi it appears to be stripped out
2/ Fixed Digis passing via AGWDigi don't get recognized by some data bases (

What we have found is : 
                             That AGWDigi appears to strip out the raw data.

Below AGWtracker / AGWDigi  there is no data that has been broadcast via RF 
The received path via RF is always TCPIP*


2008-07-23 16:22:05 NZST: ZL2KO-1>APNU3B,TCPIP*,qAS,zl2max:!4024.61S/17543
63E# MARS Br20 Digipeater 144.575Mhz
  2008-07-23 16:31:40 NZST: ZL2KO-1>UIDIGI,TCPIP*,qAS,zl2max:UIDIGI 1.9
  2008-07-23 16:52:07 NZST: ZL2KO-1>APNU3B,TCPIP*,qAS,zl2max:!4024.61S/17543
63E# MARS Br20 Digipeater 144.575Mhz
  2008-07-23 17:31:40 NZST: ZL2KO-1>UIDIGI,TCPIP*,qAS,zl2max:UIDIGI 1.9

Max (ZL2MAX) turned AGWDigi off ran Ui-View as a Digi and all the raw data 
and pathing became available and is viewable all stations passed via here 
showed all pathing data etc
2008-07-23 21:02:46 NZST: ZL2KO-1>APNU3B,WIDE2-1,qAR,ZL2MAX-1:!4024
61S/17543.63E# MARS Br20 Digipeater 144.575Mhz - Contact ZL2MAX
  2008-07-23 21:11:39 NZST: ZL2KO-1>APNU3B,WIDE2-2,qAR,ZL2MAX-1:!4024
61S/17543.63E# NZMG E2741416 N6084857 MARS Br20 Digipeater
  2008-07-23 21:22:11 NZST: ZL2KO-1>APNU3B,WIDE1-1,qAR,ZL2MAX-1:!4024
61S/17543.63E# MARS Br20 Digipeater 144.575Mhz

ZL2MAX-2 Mobile via ZL2KO-1, ZL2MAX-1 AGWDigi No RF path just TCPIP*

2008-07-23 16:15:07 NZST: ZL2MAX-2>APT311,TCPIP*,qAS,zl2max:!4017.06S/17544
 2008-07-23 16:15:26 NZST: ZL2MAX-2>APT311,TCPIP*,qAS,zl2max:>TinyTrak3

ZL2MAX-2 mobile via ZL2KO-1 , UI-View Digi full RF path 

 2008-07-24 07:39:27 NZST: ZL2MAX-2>APT311,WIDE3-3,qAR,ZL2MAX-1:>TinyTrak3
 2008-07-24 07:39:29 NZST: ZL2MAX-2>APT311,ZL2KO-1*,WIDE3-2,qAR

Why does this happen is it hard coded into AGWDigi to do this or can you
change it so it shows all the data, if this 
is possible where do you change it ?

This data stripping is a pain when you are trying to debug  things and see
how data has arrived at a given place, 
replacing all the TX data with TCPIP is not a good thing nothing should be
stripped from the TX data.

Also AGWDigi,  doesn't show up on some servers as a digi ( DB0ANF site )
wouldn't post ZL2KO-1 as a digi yet now that AGWDigi
has been taken out and replaced with Ui-View  ZL2KO-1 appears as a digi on
DB0ANFs site


73 Phillip

More information about the aprssig mailing list