[aprssig] APRS-IS Tier 2 News
Phil - AD6NH
ad6nh_lists at dslextreme.com
Tue Jun 3 18:06:04 CDT 2008
Good morning from Tier 2 headquarters in sunny southern California! I
would like to take this time to outline some important
changes/enhancements to the APRS Tier 2 server network. The network has
been quietly growing again in the past year. We now have 44 servers
online in 19 different countries, and 8 more servers are currently under
sea trials. A positive benefit to this growth has been the influx of
great knowledge from the different sysops that has allowed us to make
many enhancements to the network as well.
Most recently, there was a thread on the APRS SIG regarding rotate
addresses [again]. Most of us at Tier 2 are still firm believers that
if your client software allows you to set one or more server names
manually, then you should always do that before utilizing a round-robin
rotate address, but we also recognize that there are software packages
that do not offer that. There are also folks who will always want the
simple answer, and the rotate addresses to offer a simple, if not the
most effective, connection option. The down sides of round-robin DNS
are well documented, even on these lists, so I wont repeat them.
However, we at Tier 2 recognized early on the desire for regional
association with operations. Based on some recent threads, this seems
to also be true for rotate addresses. For some time now,
rotate.aprs2.net has been available as a connection option to Tier 2.
This address keeps a pool of no more than 22 of the Tier 2 servers (to
accommodate some router firmware that will not parse more than 22) and
automatically adjusts for servers that go offline. It is a fairly
effective setup, but some clients have responded that they do not
understand why their UI-View program running in Tuscaloosa is connected
to the APRS server in Thailand. While internet routing vs. political
boundaries is an interesting study, suffice it to say that most clients
will want to connect to something that makes regional sense. So for the
past five months, our sysops have been working on and testing a regional
rotate address system for Tier 2 that addresses many of these issues.
Based on the packet radio network routing names of several years past,
we have broken down the world into five server regions, and have
assigned servers to those five addresses in those regions. Again, based
on the packet radio routing model, we have created the following five
regional rotate addresses:
Information about which server is in which region, along with a map of
the five server regions, can be found right on the Tier 2 home page
www.aprs2.net There were two debates that ran for a long time in
developing this scheme. First, there are often political questions when
assigning various countries of the world to a region - most notably is
the question of where Europe and Asia are separated. I can assure you
that there was no political or nationalistic malice in choosing where
servers were placed! Simple logic was employed. Secondly, it had been
requested that we try to adhere to strict internet routing - i.e. have
the client connect to the server that was closest in IP terms.
Unfortunately, while that make very good technical sense, there really
is no way to effectively trace and catalog the routes from each
potential client to each of the servers. At any rate, this setup seems
to be working well, and so it is time to roll it out. Again, I still
believe you should be trying to use actual server addresses whenever
possible, but if you are looking for a regional rotate address that
makes more sense to you, you now have it!
We always welcome comments and suggestions. We serve the APRS-IS's
30,000 plus clients with an average of 1,850 at any given time. This is
your network and we are happy to be the maintenance crew for it. Thanks
again, and enjoy!
73, on behalf of the Tier 2 team.
Phil Pacier - AD6NH
Tier 2 Network Coordinator
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig