Order Tray | Contact Us | Home | SIG Lists

[aprssig] Time to UPGRADE obsolete DIGIS!

Dave Baxter Dave at emv.co.uk
Mon Jun 9 08:00:22 UTC 2008

You can use 27C512 chips too, often much easier to find..  Just program
the '256 image in the TOP half of the chip, and it will work just fine
in a socket expecting a 256.   If you want to be doubly sure, program it
into both top and bottom halfs of the chip.

I've been doing this with other equipment that normaly expects 27256's,
and never had a failure yet.

As to UIDIGI.  AFIK, that does not run on the TNC220, due to that not
being a "clone" of the TNC2.  The UIGIGI website seems rather slow and
clunky today....

> -----Original Message-----
> From: Chuck Gooden [mailto:Chuck.Gooden at comcast.net] 
> Sent: 06 June 2008 15:18
> To: bruninga at usna.edu; TAPR APRS Mailing List
> Subject: Re: [aprssig] Time to UPGRADE obsolete DIGIS!
> Looks like they are availbale from Jameco (http://www.jameco.com) for
> $3.19 USD
> Robert Bruninga wrote:
> > Everyone else, if you can find old 27256 EPROMS (I think) 
> save them to 
> > backup the dwindling supply of these old EPROMS.
> >   
This mail has been scanned by Palmer Cook Computer Services Limited.  www.palmercook.co.uk

More information about the aprssig mailing list