Order Tray | Contact Us | Home | SIG Lists

[aprssig] I-80 Ohio/IN and D710 objects

Robert Bruninga bruninga at usna.edu
Tue May 27 22:43:42 UTC 2008


Yes, the format is fixed..
... DDMM.~~N/DDDMM.~~Wr Tnnn Rxxm Net...... Mtg.....
Though Net...... And Mtg..... Are optional. 

If there is no PL, then best to use "Toff" to be consistent with
the leading "T" in the "Tnnn" format.


> -----Original Message-----
> From: Jesse (KC5LOS) [mailto:kc5los at yahoo.com] 
> Sent: Tuesday, May 27, 2008 6:31 PM
> To: bruninga at usna.edu; TAPR APRS Mailing List
> Subject: Re: [aprssig] I-80 Ohio/IN and D710 objects
> 
> Gotta watch that space after the Wr NoPL .
> For some reason I have had issues with that and right after
the "r" 
> there has to be a Txxx or NoPL and actually NoPL can be
anywhere if 
> there is no PL tone.
> 
> I had one of my repeaters in the beacon and I fought with it 
> not Tuning 
> and sending the right PL to the TUNE function in the D710 
> (New Firmware 
> 2.0) unless I had a T107 behind the "r".
> 
> I haven't tried my IRLP node to see but it has the Node number
in the 
> object name and the Freq/Tone in the status but I am also
running one 
> version from the current change. It shows the Freq. but I 
> havn't tried 
> to TUNE.
> 
> Still trying to figure out the D710 tune now that the PL gets
decoded.
> 
> 
> Robert Bruninga wrote:
> EDIT:
> 
> > Use this OBJECT format instead:
> > ";147.045PA*111111zDDMM.~~N/DDDMM.~~Wr NoPL Rxxm Uniontown
ARC
> > W3PIE "
> > Bob, WB4APR
> > 
> > 
> > 
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> > 
> 





More information about the aprssig mailing list