Order Tray | Contact Us | Home | SIG Lists

[aprssig] Kenwood TM-D700A question

Stephen H. Smith wa8lmf2 at aol.com
Fri May 30 15:26:29 UTC 2008


Joseph M. Durnal wrote:
> I noticed that The D700 has a "data" connector on it.  I was wondering
> - could this rig be set to use APRS with the internal TNC and at the
> same time use an external TNC for other packet applications?
>
> Thanks & 73 de Joseph Durnal NE3R
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>   


The problem is that the "data" connector (actually TX and RX audio and 
PTT) follows the side selected for mic operation.   If you want the 
external TNC on the band on right side, and almost never switch the mic 
to the left (normal APRS) side, it will work.    

BTW, this is one of the improvements in the D710 - you can lock the 
6-pin mini-DIN to one side regardless of the mic mode.  



--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      14400    [Think bottom of the 2M band]
Home Page:          http://wa8lmf.com  --OR--   http://wa8lmf.net

NEW!   World Digipeater Map
  http://wa8lmf.net/APRSmaps

JavAPRS Filter Port 14580 Guide
  http://wa8lmf.net/aprs/JAVaprsFilters.htm

"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://wa8lmf.net/DigiPaths

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:







More information about the aprssig mailing list