[aprssig] VHF data transceivers available

[Scott Miller]

The service manual is in the middle of a serious clean-up - by a native 
English speaker, no less.  =]  The configuration program is going to 
need some attention, too.

Scott
N1VG

David W. Barrow III wrote:
> Scott,
> 
> 	I took a look at the manual.  You might want to check the spelling of both
> "reading" and "writing" in the illustrations of frequency programming.  I
> realize that this is "nit-picking" but I thought that you might have been
> too involved with the production to notice.
> 
> 	Best wishes for success.
> 
> 73 de Dave, N9UNR
> 
> -----Original Message-----
> From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org]On
> Behalf Of Scott Miller
> Sent: Thursday, November 06, 2008 4:17 PM
> To: TAPR APRS Mailing List
> Subject: [aprssig] VHF data transceivers available
> 
> 
> The VHF version of the 5-watt synthesized transceiver I posted about the
> other day is now (finally) available:
> 
> https://www.argentdata.com/catalog/product_info.php?products_id=110
> 
> T2 boards are still in the works.  Unlike the UHF units, these will do 5
> kHz and 6.25 kHz channel spacing.
> 
> The service manual still shows only the UHF version, but the pinouts and
> important specs are the same.
> 
> 73,
> 
> Scott
> N1VG
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
>