Order Tray | Contact Us | Home | SIG Lists

[aprssig] TMD-710 and the VGS-1

Steve Noskowicz noskosteve at yahoo.com
Mon Sep 8 17:42:41 UTC 2008


A step backwards ??   Arrrg!

  I don't know, and haven't fiddled with all the required settings for the D700, but the D700 does announce.  Could it be that the D710 must be set to "MINE".  Have you gone through some of the settings and it still won't announce for APRS, Kai?

-- 
73, Steve, K9DCI


--- On Mon, 9/8/08, kai.brandt at hjemme.no <kai.brandt at hjemme.no> wrote:

> From: kai.brandt at hjemme.no <kai.brandt at hjemme.no>
> Subject: Re: [aprssig] TND-710 and the VGS-1
> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
> Cc: "TAPR APRS Special Interest Group" <aprssig at lists.tapr.org>
> Date: Monday, September 8, 2008, 6:34 AM
> >----- Original Message -----
> 
> >Does anyone know if the TM-D710 with the VGS-1 voice
> chip behaves in the 
> >same way with incoming APRS  messages as does the
> TM-D700 and it's voice 
> >chip? i.e. Speak the originating callsign of an
> incoming message and 
> >it's text?
> 
> It does NOT announce the originating callsign and it does
> NOT read the message without the sender activating this.
> 
> If the sender starts a message with "%" the radio
> announce the callsign and read the message letter by letter.
> (pretty useless as most people don't know about the %
> function)
> 
> The following wish in a future firmware has been delivered
> to a Kenwood representant:
> 
> Speech announce when receiving messages even without the
> “%” in front of the message.
> I.e “Message from: callsign” or just “callsign”
> “New bulletin”
> Just announce the senders callsign. Must be possible to
> turn off independent from other voice/sound functions
> 
> 
> Kai Gunter
> LA3QMA
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


      




More information about the aprssig mailing list