[aprssig] Xastir Internet->RF configuration
ve7gdh at rac.ca
Mon Apr 6 07:22:24 CDT 2009
Greg KO6TH wrote...
> I don't think the Tx side is working right. If I tell Xastir to
> "Transmit now", I see the TNC's PTT LED come on, and I hear the usual
> braaap of a packet, but my D7 doesn't display anything. Shouldn't I
> see my Xastir station show up?
Yes, the D7 should be able to see it. What is the transmit delay? If
it's too short, nothing could decode its tones. I find anything over
100 ms is reliable and have even used less, but a bit more would
be more conservative. You could try setting it to a slightly higher
value... or even temporarily to a ridiculously long one for a quick
> I also tried sending a message to the D7 (which is configured to
> automatically acknowledge it), but the D7 doesn't do anything. Is this
> an audio quality issue with the TNC, perhaps? Or, is it sending a
> packet that the D7 ignores?
Do you have another TNC for testing? Does the D7 decode tones from other
> Also, if I send a position report from the D7, at a low enough power
> that the real digis don't hear it, I see my D7 show up on Xastir's map
> and on aprs.is, as usual. But I don't hear it repeated back out over
> the air (no PTT, no audio). Is that expected? (I do hear it from
> K6FGA-1 when I crank up the power, and get the re-assuring "My
> Position" display on the D7.)
Xastir is hearing and decoding the D7, but is Xastir set up as a digi?
73 es cul - Keith VE7GDH
"I may be lost, but I know exactly where I am!"
More information about the aprssig