Order Tray | Contact Us | Home | SIG Lists

[aprssig] TNC's for LINUX computers

Andrew Rich vk4tec at tech-software.net
Mon Dec 28 02:48:12 UTC 2009


Excellent that has given me some ideas

Thanks

Andrew


----- Original Message ----- 
From: "Patrick" <winston at winston1.net>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Monday, December 28, 2009 12:41 PM
Subject: Re: [aprssig] TNC's for LINUX computers


> Under Linux, once you have the TNC connected, depending on how you
> configure it, it exists as a network device just like your Ethernet card
> (or any other network device )..  You can bind it to an IP address
> (issued to you by your local AMPR admin) and then you can ssh to it over
> the air just as you would any other network link..  Of course remember
> this can't be for business use, but for a while I had a backup link into
> my home network..
>
> p
>
> Andrew Rich wrote:
>> If I were to hook up a TNC to a com port on a LINUX server, and then
>> use the
>> connected light on the TNC to pass messages to the LINUX server over air,
>> could I use the TNC setup to access a command prompt on a remote server ?
>>
>> Although 1200 baud Packet is slow, it makes for an easy wireless
>> solution to
>> LINUX command line opeartions
>>
>> Andrew VK4TEC
>>
>> Anyone done this ?
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.430 / Virus Database: 270.14.121/2589 - Release Date: 12/27/09 
09:18:00




More information about the aprssig mailing list