Order Tray | Contact Us | Home | SIG Lists

[aprssig] [SPAM] Automatic omni DF query

Scott Miller scott at opentrac.org
Tue Feb 10 17:46:26 UTC 2009

Yes, that should be possible.  I'll have to think about how I might 
change the scripting system to support that, rather than making it a 
built-in feature - that's exactly why the scripting system is there, to 
try to reduce the number of special applications that have to be 
hard-coded in the firmware.


> wow nice tool...
> Is it possible to make a configuration like always receive on xxx MHz 
> when signal is heard report a DF-format on 144.800MHz or whatever aprs 
> frequency you are using?
> Then we can use 4-5 devices like this on every mountain top and 
> listening for the repeater input frequency and plot a position on where 
> the user are.
> If this is possible it would also be nice if you can send a command to 
> the device to toggle between the mode you are describing and what i 
> mentioned. You might have to send this command on the repeater 
> inputfrequency but this is not a problem as it's a short burst.
> Kai Gunter
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig

More information about the aprssig mailing list