[aprssig] gps/tnc linkup
Scott Miller scott at opentrac.orgWed Feb 18 04:34:19 UTC 2009
- Previous message: [aprssig] gps/tnc linkup
- Next message: [aprssig] gps/tnc linkup
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
If all the handhelds have is USB, then no, this won't work. It's not a USB host. It *would* be possible to build one - it would take a considerable amount of work, a larger processor, and probably an external power supply, though. I have a couple of development boards on hand that I got to experiment with that, but I dropped it when I discovered that most of the current USB models do NOT do position data at all over USB - they just go into mass storage mode as soon as they're connected. Scott N1VG Greg D. wrote: > I'm pretty sure that the Garmin eTrex HC series only have USB, and if I > recall Scott's messages, the protocol they use over USB is not NMEA. > So, unless his new magic cables can decode this stream from the handheld > units (I thought it only worked on the Nuvi-series), I think you're out > of luck. > > If you haven't purchased the GPS itself yet, there still are some with > serial interfaces. The larger GPSMAP-60 has it, as do the original > eTrex (before the H-series). > > Greg KO6TH > > p.s. if those Magic Cables do work with the handheld units, I have an > eTrex Vista HCx that would be nice to connect one to... > > > > From: radiooperator at comcast.net > > To: aprssig at tapr.org > > Date: Tue, 17 Feb 2009 13:39:24 -0500 > > Subject: [aprssig] gps/tnc linkup > > > > hi folks, i have one of them gps cables i got from aea that has a > phono plug > > that suppose to plug into a gps, anyone seen a gps with a input/phono > plug? > > i have not, anyway wanting to try a garmin extrex hc series or another > > garmin gps that i have to a kpc3+ and wondering how the easy way to > do it. > > i know im going to have to cut some wires to the gps,s to get the > input and > > output for the device. does anyone have any ideas the best way to go? > > wondering why no one is selling the cable to hook the gps to tnc besides > > the aea phono plug unit. thanks in advance. just would like to give > gps/tnc > > aprs a try tracking a vehicle. 73 kc8gkf > > > > > > > > _______________________________________________ > > aprssig mailing list > > aprssig at tapr.org > > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig > > ------------------------------------------------------------------------ > See how Windows connects the people, information, and fun that are part > of your life. See Now > <http://clk.atdmt.com/MRT/go/msnnkwxp1020093175mrt/direct/01/> > > > ------------------------------------------------------------------------ > > _______________________________________________ > aprssig mailing list > aprssig at tapr.org > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
- Previous message: [aprssig] gps/tnc linkup
- Next message: [aprssig] gps/tnc linkup
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
