[aprssig] KPC3+ WIDE setup
Christopher K. Greenhalgh
chris at n8wct.com
Fri Jan 30 12:13:07 CST 2009
I'm running a KPC-3+ w/ver 9.1...here is how I've got it set up;
1 EVERY 00:23:00
2 EVERY 00:17:00
3 EVERY 00:19:00
4 EVERY 00:21:00
1 >111111zhttp://www. <zhttp://www.n8wct.com/n8wct-4/> n8wct.com/n8wct-4/
2 ;146.760-V*111111z3957.42N/08259.90Wr146.760MHz T123 R40m W8RXX
3 ;444.200xx*111111z3957.78N/08259.97Wr444.200MHz T151 R30m W8RXX
4 =3959.91NS08301.32W#PHG9590/W2 OHn-N/Columbus UI-Digi & I-Gate
1 APN391 VIA WIDE1-1
4 APN391 VIA WIDE1-1
UIDIGI ON WIDE4-4,WIDE5-5,WIDE6-6,WIDE7-7
UNPROTO APN391 VIA WIDE1-1
Notice the btext is not used, thus giving another "object" if needed. Also
note the repeater objects don't do any hops, and the tx frequency of
Hope this helps..
Chris Greenhalgh, N8WCT
From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Clay Melhorn
Sent: Friday, January 30, 2009 9:15 AM
Subject: [aprssig] KPC3+ WIDE setup
I am a new subscriber to this group and am very much in need of your help.
Our club has authorized a new aprs WIDE to be installed and I am putting the
Our repeater commitee got the antenna installed sooner than I anticipated in
this super cold wx so the rush is on.
The antenna is a dual band DB2 I believe I was told and it is up at 300
The radio is a FT1500m Yaesu.
The tnc is a new KPC3+ ver 9.1
I am looking for the proper setup entries for the KPC3+ as a wide
Basically, I am, looking to copy the setup of an exsisting WIDE digi running
Of course I will replace the local gps, callsign, local voice rptr info, etc
with our info.
I have never done this before and would really prefer to get it right the
first time with your help.
So if someone would not mind putting me on the fast track I would really
Besides casual aprs activity the main purpose of this wide digi is to cover
the county during our wx spotter activities.
We are a rural county well south of Chicago and currently are virtually aprs
free in the area at this time.
I have been trying to prime the locals with a few newsletter articles about
aprs and some are interested.
I initially contacted Bill Diaz KC9XG, Bill suggested this group is the best
source for the setup info I seek.
Thankyou in advance,
Clay Melhorn N9IO Bonfield, IL
Windows LiveT: E-mail. Chat. Share. Get more ways to connect. See how it
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig