Order Tray | Contact Us | Home | SIG Lists

[aprssig] Digipeater Hick-up - KPC3+ Goes Deaf?

Wes Johnston, AI4PX wes at ai4px.com
Tue Jul 28 15:59:12 UTC 2009


I had a 5v supply fail in a kpc3 once and "nearly" cook the microprocessor.
I say nearly because it booted and ran fine except that it would not decode
packets with CD INT mode.  Instead I had to use the default of squelch CD
which stinks for digipeater use.  Granted this was probably a once in a
lifetime failure mode, but if you are not digipeating anything at all, it
could be your problem.

Wes
---
Hitler gave great speeches too!


On Tue, Jul 28, 2009 at 06:46, Mr Jeffrey L Ross
<radiooperator at comcast.net>wrote:

> hi, make sure you set the recv. lite on the tnc with the squlz. if you can
> not get it to work, then set your cd command to software or internal,
> whatever one it is not on then try it. set your vol. to low but not off.
> good luck
>
> kc8gkf
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20090728/3fbed915/attachment.htm>


More information about the aprssig mailing list