[aprssig] Stand Alone WX
Michael Wolthuis wolthui3 at msu.eduMon Jun 22 18:54:19 UTC 2009
- Previous message: [aprssig] Citizen Health Observer Program (CHOP)
- Next message: [aprssig] Stand Alone WX
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Is there maybe a mode that the d710 does decode? We run our Peet units in Packet Mode, but they do not decode on d710. Thanks, Mike kb8zgl On 6/22/09 1:01 PM, "Tyler Griffiths" <n7uwx at comcast.net> wrote: > The TM-D710 does not decode unless I set the wx station wrong. > > Tyler > > On Mon, Jun 22, 2009 at 7:56 AM, Robert Bruninga<bruninga at usna.edu> wrote: >>> Speaking of Peet Brothers... >>> We set up an 2100 running directly into a TNC >>> for the Weather Service (KF6RAL-3)and noticed >>> the data never gets seen by the Kenwood radios. >> >> We did not expect to see raw WX formats on the air. At the time >> of the APRS spec, there were 4 different formats from Peet Bros, >> and 3 different instruments from Davis, and new ones were being >> introduced every year. It was impossible to see the future and >> see what would be the dominant formats. The APRS spec only had >> one, and it was assumed that any remote APRS WX station would >> have a processor to convert to the on-air APRS format. >> >> Now Opentrack and Byonics and others have stations that can do >> the conversions. >> >> Also the TM-D710 does decode the Peet Packet mode on the air... >> I think... >> >> Bob >> >> >>> >>> On Sun, Jun 21, 2009 at 9:35 AM, Kriss A. Kliegle >>> <kliegle at myfairpoint.net> wrote: >>> >>> >>> I've been running a Peet for years as a stand alone WX >>> digi. Since my site is solar powered, the power consumption >>> is minimal. Just don't use/buy one w/a humidity sensor. They >>> don't last but a few months, gave up replacing them. Another >>> issue yet to be resolved is the flow of WX data to the KPC-3, >>> usually in winter.Data will stop being updated and will send >>> same temp and winds every transmission, or it will be corrupt >>> and give rediculous temp and wind readings until I climb the >>> hill and reset the Peet Bro WX Station, KPC-3, and/or both. I >>> thought it was temperature related, but installing everything >>> in a styrofoam cooler and using the heat of the radio's >>> finals ( IC-2000 ) still didn't stop the unreliable WX data. >>> Temp in the cooler was >60, even in the coldest of winter WX >> in NH. >>> >>> Kriss KA1GJU (-3 WX Digi) >>> >>> >>> >>> _______________________________________________ >>> aprssig mailing list >>> aprssig at tapr.org >>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig >>> >>> >>> >>> >>> >>> >>> -- >>> Tyler Griffiths >>> N7UWX >>> >>> See where I am: >>> http://map.findu.com/n7uwx-12 >>> P. J. O'Rourke >>> <http://www.brainyquote.com/quotes/authors/p/p_j_orourke.html> >>> - "If government were a product, selling it would be >> illegal." >>> >> >> >> _______________________________________________ >> aprssig mailing list >> aprssig at tapr.org >> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig >> > >
- Previous message: [aprssig] Citizen Health Observer Program (CHOP)
- Next message: [aprssig] Stand Alone WX
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
