[aprssig] On-Star
Dave Baxter dave at uk-ar.co.ukWed May 6 13:38:22 UTC 2009
- Previous message: [aprssig] On-Star
- Next message: [aprssig] N1BQ-3 ... end of an era, beginning of a new one
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Scott... As in the earlier links, this shows how... http://members.cox.net/onstar/ So, did you connect a G/shock sensor to your tracker in the Honda? ;-) Cheers. Dave G0WBX > -----Original Message----- > From: Scott Miller [mailto:scott at opentrac.org] > Sent: 06 May 2009 05:16 > To: TAPR APRS Mailing List > Subject: Re: [aprssig] On-Star > > How hard is it to physically tap into the Onstar GPS? I > wouldn't mind doing a translator if there's a demand for it. > I just bought a vehicle tonight myself, but it's a Nissan. > My Honda got totaled a couple of weeks ago - my tracker > actually got a packet out a couple of seconds after I got > hit, when I'd slowed down to 14 mph but hadn't managed to get > out of the lane yet. > > If anyone has suggestions on antenna setups for a Nissan > Pathfinder that won't interfere with putting stuff on the > roof rack, let me know. > > Scott > N1VG > > Dave Baxter wrote: > > I thought I had read much of that before. A very similar > article was > > on the Hackaday site a year or so back. > > > > The biggest single issue, is that as the article here etc > says, if you > > switch the Onstar's GPS from MotoBinary mode to NMEA, the > vehicle's on > > board Onstar system error's. > > > > No doubt someone could "do" a single chip Atmel/Pic or whatever, to > > take the MotoBinary data, extract what's needed for APRS, and then > > spit out NMEA strings for our needs, leaving the on board > OEM systems > > happy and unconfused. > > > > Or, perhaps a "special version" tracker that is happy with the > > Motorola Binary format and does the APRS thing > indipendantly. No need > > for a D700/D7/D710 etc then, probably take the unmodified data (no > > need for > > RS232 conversion) too. > > > > Just musing... > > > > 73. > > > > Dave G0WBX. > > > >> -----Original Message----- > >> From: Kent Hufford [mailto:khufford at atlanticbb.net] > >> Sent: 03 May 2009 13:09 > >> To: 'TAPR APRS Mailing List' > >> Cc: W1JD at mindspring.com > >> Subject: Re: [aprssig] On-Star > >> > >> > >> http://members.cox.net/onstar/ > >> > >> Kent > >> KQ4KK > >> > >> -----Original Message----- > >> From: aprssig-bounces at tapr.org > >> [mailto:aprssig-bounces at tapr.org] On Behalf Of JD Delancy > >> Sent: Sunday, May 03, 2009 8:06 AM > >> To: aprssig at tapr.org > >> Subject: [aprssig] On-Star > >> > >> Has anyone successfully interfaced the Kenwood D700 with General > >> Motors' > >> On-Star ? > >> > >> jd > >> > > >> > >> _______________________________________________ > >> aprssig mailing list > >> aprssig at tapr.org > >> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig > >> > >> > >> > >> > >> > > > > _______________________________________________ > > aprssig mailing list > > aprssig at tapr.org > > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig > > > > > > > >
- Previous message: [aprssig] On-Star
- Next message: [aprssig] N1BQ-3 ... end of an era, beginning of a new one
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
