[aprssig] APRStt software?

[Scott Miller]

It needs the APRStt parser, and it needs the FSK modulator linked in - 
it's already been ported to that processor for the OT1+ RT board.  Right 
now the SR1 only receives Bell 202 (for firmware updates) and doesn't send.

But most importantly, I need to improve the decode performance of the 
middle (4-5-6) DTMF row so that it works reliably with fast DTMF tones. 
  I know what the problem is, I just need to find a way to fix it that's 
not going to take too much of the meager CPU power available.

Scott
N1VG

Rick Ruhl wrote:
> What glue do you need? The parse code that I wrote?
> 
> 
> 
> -----Original Message-----
> From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
> Of Scott Miller
> Sent: Monday, May 18, 2009 1:46 PM
> To: TAPR APRS Mailing List
> Subject: Re: [aprssig] APRStt software?
> 
>> It is a Windows app written in C.  Takes up a whole 500K.  It will retail
>> for around $29.95 when released.
> 
> 500k?  Talk about bloatware.  =]  My ADS-SR1 has DTMF and Bell 202 
> (along with a bunch of other stuff) in about 16k.
> 
> If there's sufficient interest I could modify it to be an APRStt 
> gateway.  All of the hard stuff is already written, just needs some glue 
> to put it all together.
> 
> 
> Scott
> N1VG
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.238 / Virus Database: 270.12.27/2112 - Release Date: 05/18/09
> 06:28:00
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
>