Order Tray | Contact Us | Home | SIG Lists

[aprssig] aprs setup/weatherlink software

Pete Loveall AE5PL Lists hamlists at ametx.com
Sun Oct 18 10:51:46 UTC 2009


If you use your callsign with a valid passcode, APRS-IS is the place for you ;-).  The APRS-IS server operators would prefer clients connect to second tier servers as the core servers tend to be running close to their maximum connections.  I recommend you use a round-robin DNS name so you are not limited to a single server (redundancy, load-balancing, etc.).  The aprs2.net network has a number of round-robin DNSes such as rotate.aprs2.net.  There are others listed at www.aprs2.net.

Hope this helps.

73,

Pete Loveall AE5PL
pete at ae5pl dot net



> -----Original Message-----
> From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On
> Behalf Of Ben Lindner-VK5JFK
> Sent: Saturday, October 17, 2009 11:55 PM
> To: vantagepro at yahoogroups.com; TAPR APRS Mailing List
> Subject: [aprssig] aprs setup/weatherlink software
> 
> Hi All,
> 
> With in  the Weatherlink pragramme you can set it up to upload to the
> APRS network but as you can see below it is going to APRS IS Server:
> second.aprs.net Is this the correct server or should it be something
> else. ( ignore all the other information that is shown there )
> 
> cheers
> Ben Lindner
> VK5JFK
> 




More information about the aprssig mailing list