[aprssig] ISS not passing through UI-VIEW
Andrew Rich vk4tec at tech-software.netSat Oct 31 06:33:57 UTC 2009
- Previous message: [aprssig] ISS not passing through UI-VIEW
- Next message: [aprssig] ISS not passing through UI-VIEW
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
RS0ISS-3>P0PPP0,SGATE,WIDE,qAR,VK3JTM-5 >> :'vX l '/]HTV hatch closed.Undock Fri Is from the APRS-IS stream "According to aprs.fi, the beacons don't contain a lat / long." P0PPP0 and 'vX l ' "However, I don't know why your IGate isn't gating the beacons." I am hoping that the /1 is ok in the packet. Can't remember - been a while new TNC RS0ISS-3>P0PPP0,SGATE,WIDE/1 >> : <<UI>>:'vX l '/]HTV hatch closed.Undock Fri. I will replay the packet over serial and play with the format My APRS-IS filter is "p/VK4" but that should not and has not stopped packets passing to IS I have run the TNC on APRS ground stations and it passes packets ok. More investigation needed. If it does not come good I will just run XASTIR or make my own perl code to send it. Andrew ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca> To: "TAPR APRS Mailing List" <aprssig at tapr.org> Sent: Saturday, October 31, 2009 2:03 PM Subject: Re: [aprssig] ISS not passing through UI-VIEW > Andrew VK4TEC wrote... > >> Running a satgate here >> RS0ISS-3>P0PPP0,SGATE,WIDE/1 >> : <<UI>>:'vX l '/]HTV hatch closed.Undock Fri. >> Does not get passed to the Internet using UI-VIEW >> TNC: KPC9612+ >> And yet others do..... > >> 30/10/09 22:20:39 RS0ISS-3>P0PPP0,SGATE,WIDE,qAR,VK3JTM-5 >> :'vX l '/]HTV hatch closed.Undock Fri. > > Is that copied from the terminal window in UI-View? > >> I have "Open the gateway" "Insert station callsign" >> "Gate objects" selected. I am authenticating with a password. >> Options - "Show igate traffic shows nothing" >> It is like UI-VIEW has not chosen to pass the packet > > http://aprs.fi/?c=raw&call=RS0ISS-3&limit=50 > > According to aprs.fi, the beacons don't contain a lat / long. However, I > don't know why your IGate isn't gating the beacons. Some of the IGates > that are passing it are using UI-View. > > 73 es cul - Keith VE7GDH > -- > "I may be lost, but I know exactly where I am!" > > > _______________________________________________ > aprssig mailing list > aprssig at tapr.org > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.423 / Virus Database: 270.14.39/2470 - Release Date: 10/30/09 15:18:00
- Previous message: [aprssig] ISS not passing through UI-VIEW
- Next message: [aprssig] ISS not passing through UI-VIEW
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
