Order Tray | Contact Us | Home | SIG Lists

[aprssig] Inexpensive APRS transmitter kit

Scott Miller scott at opentrac.org
Sun Apr 18 23:35:39 UTC 2010


I've got a few examples of a tracker board I build specifically for 
balloon use, but I'm out of MX146LV transmitters now.  Here's a little 
bit on the unit:

http://n1vg.blogspot.com/2010/03/balloon-launch.html

I've got another board revision on the way that's smaller, runs on a 9V 
battery, and will have support for a small camera for SSTV.

Right now the only problem is the availability of the MX146LV.  SRB was 
having some production problems last time I checked.

Scott
N1VG

Joshua Shriver wrote:
> Sometime hopefully this year I'm hoping to release a weather balloon
> with a small payload for taking pictures, maybe other things via
> sensors.
> Wondering if there are any inexpensive, light-weight and low power
> aprs transmitters that can be used for such a thing.
> 
> Best I've found so far is the Byonic TinyTrak setup. Though it seems a
> bit pricey, though it's the best bet so far.  I've even looked into
> introduction DIY fm transmitter kits and can buy a APRS encoder for
> around $24 from another ham I know.
> 
> Any advice or recommendations would be appreciated.
> 
> -Josh
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 




More information about the aprssig mailing list