[aprssig] APRS Messenger now has APRS over PSK-63

[Stephen H. Smith]

On 2/28/2010 9:41 AM, Frank or Barbara Rossi wrote:
> Trying to get APRS Messenger and UI-View using the AGW Packet engine 
> APRS dial frequencies to line up.
> Currently using the 2100 Hz version of APRS Messenger with the dial 
> set at 10.1476 on USB.
> Several stations and I have exchanged messages, works great.
> I figure if I could get the dial frequencies to line up, I could 
> I-Gate AX25 APRS and PSK-63 APRS at the same time,
> same radio and same computer.
> The AGW Packet engine will only decode tones 2100/2300.
> With dial set at 10.1476 on USB AX25 tones are to low to decode 
> without changing dial frequency, and then PSK-63 APRS is off frequency.
>
> Should I be using a different version of APRS Messenger to get the 
> tones to line up ?
> Also What would the dial frequency and USB/LSB be ?
>


The FREEWARE version of AGWpe only offfers the 2100/2300 tones.     The 
PAY-FOR AGWpe "Pro" version offers the choice of standard 1600/1800 KAM 
tones or the original 2100/2300 tones.


------------------------------------------------------------------------

--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      WA8LMF  or 14400    [Think bottom of the 2M band]
Skype:        WA8LMF
Home Page:          http://wa8lmf.net

NEW!    Universal HF/VHF/UHF Antenna Mounting System
   http://wa8lmf.net/mobile/UniversalAntMountSystem.htm

"APRS 101"  Explanation of APRS Path Selection & Digipeating
   http://wa8lmf.net/DigiPaths

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus:


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20100228/db6f16be/attachment.htm>