[aprssig] APRX kiss escape command?

Jaye Inabnit ke6sls ke6sls at arrl.net
Thu Jul 29 22:49:36 CDT 2010

This is from the pk-12 manual--enter three control C's within one second to 
exit kiss mode. . . .  I recall setting up a exit file for running JNOS in 
the day to escape from kiss mode which was much as you just mentioned.

I tried to exit kiss mode while running minicom but was not able to do it.  I 
end up rebooting the TNC then going through the autobaud routine.  I'd really 
like to automate this  :)

thanks, 73

On Thursday 29 July 2010 19:43:02 Wes Johnston, AI4PX wrote:
> I thought the KISS escape code was 192-255-192 ($C0 $FF $C0).  Does this
> modem really require the hayes modem trick of no characters for <guard
> time> and then three $03's?
> On Thu, Jul 29, 2010 at 22:38, Jaye Inabnit ke6sls <ke6sls at arrl.net> wrote:
> > Hi all:
> >
> > I have APRX running very well now here in Eureka.  One problem I have is
> > finding a discussion list for aprx--I don't find it in the manual, nore
> > do I
> > know how to contact the main hacker-in-charge of the software.
> >
> > Anyway, I'm using an old PK-12 TNC and the escape code is three control
> > c's sent to the device.  I would love to have my config script send these
> > to the
> > TNC on exit so I can then use the TNC in normal packet mode for testing.
> >
> > Any help greatly needed!
> >
> > TU, 73

jaye, ke6sls

How much does free cost?  
How much is free worth?

More information about the aprssig mailing list