[aprssig] Hamfest Objects with Kenwood Radios
Steve Noskowicz noskosteve at yahoo.comThu Jun 17 19:51:14 UTC 2010
- Previous message: [aprssig] Hamfest Objects with Kenwood Radios
- Next message: [aprssig] Hamfest and Local info THIS WEEKEND!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
OK. Since I only have the D700 & D7 and don't do TNC/PC-client APRS, I only knew that there is an Object Packet and didn't know any more about it's capability. Thanks -- 73, Steve, K9DCI USN (Vet) MOT (Ret) Ham (Yet) --- Mr. Lynn W. Deffenbaugh wrote: > Not necessarily injected to > APRS-IS. APRS Object definitions are contained in the > payload of an APRS packet and are not subject to the AX.25 > restrictions. Check out Bob's recommendations on how > to configure a KPC-3+ and you'll see what I mean. > > Lynn (D) - KJ4ERJ > > Steve Noskowicz wrote: > > Ahhh, OK. So anything seen above that limit has > been injected directly into the APRS-IS and not on RF, > right? > > > > -- > > 73, Steve, K9DCI USN (Vet) MOT (Ret) Ham (Yet) > > > > --- Geoff wrote: > > > >> It's not a limitation of the radios, > >> but a limitation of the AX25 protocol > >> used to carry APRS. > >> The Callsign can only be 6 alpha chars with a > numeric SSID > >> between 0 and 15 > >> (-0 is the same as no SSID) > >> > >> Geoff VK2XJG > >> > >> > >> -----Original Message----- > >> From: aprssig-bounces at tapr.org > >> [mailto:aprssig-bounces at tapr.org] > >> On Behalf > >> Of Steve Noskowicz > >> Sent: Thursday, 17 June 2010 2:41 PM > >> To: TAPR APRS Mailing List > >> Subject: [aprssig] Hamfest Objects with Kenwood > Radios > >> > >> --- Bob Bruninga wrote: > >> > >>> I prepared a web page to tell eveyrone how to make > >>> > >> such an object and how to use APRS in support of the > Hamfest > >>> > >> and > >> > >>> Talkin: > >>> > > >> www.aprs.org/hamfest.html > >> > >> > >> Bob, > >> > >> For the D700, D7 and probably D710 the limit on > SSID of > >> <=15 requires a > >> modification. The date digits can be split > between > >> the call and SSID. > >> HFEST2-3 would be used for a Fest on the > 23rd. I was unable to figure out > >> a way to add the sequence byte, the "x" in your > >> description. > >> > >> On my D7 I tried, but it wouldn't accept an "x" > byte in > >> other (quasi-suffix) > >> locations such as: HFEST2-3A or > HFESTA2-3. As > >> long as all other Fest > >> objects for that day have the format "HFEST-ddx", > you're > >> ok. However, if > >> someone else has one on the same date and uses the > D700 or > >> D7, they will > >> over-write one another on the APRS-IS. > Locally, of > >> course, there ok. It could be added as a > pre-fix, but that destroys the > >> TOCALL simplicity and > >> precludes searching for HFEST* on the net. > >> > >> It's a shame restrictions were placed on the > TOCALL on > >> these radions. > >> > >> -- > >> 73, Steve, K9DCI USN (Vet) > MOT (Ret) Ham > >> (Yet) > > > _______________________________________________ > aprssig mailing list > aprssig at tapr.org > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig >
- Previous message: [aprssig] Hamfest Objects with Kenwood Radios
- Next message: [aprssig] Hamfest and Local info THIS WEEKEND!
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
