[aprssig] Remote programming a KPC3+ via RF

[Ralph Milnes]

Clay,

 

Can you receive anything from the DIGI in HyperTerm? A relayed APRS packet,
for example? 

 

It would seem if you can hear a response on the D700, then something should
display in Hyperterm. 

 

Could it be a problem with the display settings in HyperTerm? I  use WinPack
mostly so I'm no that familiar with HyperTerm.

 

Ralph NM5RM

 

 

 

From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Clay Melhorn
Sent: Sunday, October 31, 2010 9:20 PM
To: APRSSIG
Subject: [aprssig] Remote programming a KPC3+ via RF

 

Hello All,
Although I have researched this question (and) already have
the procedure in a file I keep on the desktop of my fill-in digi computer
I have been unsuccessful at (connecting) to one of our super (any) of our
super digi's.
One of the clubs have changed club callsigns soI need to make the change
soon if not now.
I have done this so many times before and cannot figure out what might be
wrong.
Yes I know the MYREMOTE callsign I gave them and since I cannot connect to
any of
the three I have control of I suspect I am doing something wrote here at
home.
2m rig with an MFJ-1278 and windows hyperterminal.
 
I go into command mode at the cmd: prompt I type c (the remote call)
Listening in with a TM-D700A I hear the super digi respond on each try but
never see the 6 character string
only cmd:
 
It took a lot for my to send this email so go easy, what the heck am I
missing here?
I've done this many times only it's been a while apparently...

Clay Melhorn N9IO Bonfield, IL
Webmaster: KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/
 
 
 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20101031/20d0733a/attachment.htm>