Order Tray | Contact Us | Home | SIG Lists

[aprssig] iGate on an IRLP node?

Fredric Moses fred at moses.bz
Thu Aug 18 16:21:07 UTC 2011


I run APRX on my IRLP nodes... heck i have it on all sorts of devices... linksys wrt54g's... Asus routers with open wrt.  mini-itx systems in tool boxes..  I wish it had some features.  like web page status and things. but it simple.. works and runs well in a production environment.  Have 14 different digi/igates on the air with it..

--
Fredric Moses - W8FSM
fred at moses.bz



On Aug 18, 2011, at 11:54 AM, Keith VE7GDH wrote:

> Does anyone have a suggestion for some iGate software that will
> run on an IRLP node? By their very nature, IRLP nodes always have
> an Internet connection. The iGate must of course run on Linux and be
> a very light weight application. It should  gate what it hears, send
> messages to local stations, and not write any received data to a hard
> drive as the intended destination is an embedded node without such
> an animal. It has a flash drive, but I wouldn't it constantly writing
> to that. There is a serial port available for a TNC. I did ask on the
> IRLP support list, but I thought that I would try here. Dave VE7LTD
> was working on a "receive only iGate with linux soundmodem on
> a USB dongle, combined with aprx." Perhaps aprx is what I
> should be looking at? I just had a look at http://wiki.ham.fi/Aprx.en
> and at a glance, it sounds like what I'm looking for. Any comments? 
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig




More information about the aprssig mailing list