Order Tray | Contact Us | Home | SIG Lists

[aprssig] iGate on an IRLP node?

John Gorkos jgorkos at gmail.com
Thu Aug 18 19:45:09 UTC 2011


I'll second the APRX nomination.  The addition of a web-status page
would be great, but I have installed it in multiple places on embedded,
flash-memory-based systems in non-climate-controlled environments with
no problem.


On Thu, 2011-08-18 at 08:54 -0700, Keith VE7GDH wrote:
> Does anyone have a suggestion for some iGate software that will
> run on an IRLP node? By their very nature, IRLP nodes always have
> an Internet connection. The iGate must of course run on Linux and be
> a very light weight application. It should  gate what it hears, send
> messages to local stations, and not write any received data to a hard
> drive as the intended destination is an embedded node without such
> an animal. It has a flash drive, but I wouldn't it constantly writing
> to that. There is a serial port available for a TNC. I did ask on the
> IRLP support list, but I thought that I would try here. Dave VE7LTD
> was working on a "receive only iGate with linux soundmodem on
> a USB dongle, combined with aprx." Perhaps aprx is what I
> should be looking at? I just had a look at http://wiki.ham.fi/Aprx.en
> and at a glance, it sounds like what I'm looking for. Any comments? 
> 
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig





More information about the aprssig mailing list