Order Tray | Contact Us | Home | SIG Lists

[aprssig] Linking digipeaters

Wes Johnston, AI4PX wes at ai4px.com
Mon Mar 7 13:49:10 UTC 2011


Anyone remember the net/rom days in the early / mid 90's.... those nodes
could be linked in a stack.  I think one manufacturer called it "coax lan".
And there were the diode OR matrixces for hooking the nodes together.

It sure would be nice if we had a multiport KISS controller that would take
KISS frames from multiple TNCs, perform the digipeating functions and spit
the modified KISS frames back out the same or different ports.

I think digined would do this, but it runs on a DOS pc.  I'm thinking more
along the lines of something running on a small processor such that the TT4
and T2s are based on.  Most of these simple KISS devices don't use flow
control, so the device would have ot be able to buffer a couple of packets
from each port at a time.  It'd probably require a real hardware UART.

Any ideas?

Additionally, it would sure be nice if the digipeaters kept up with the
number of seconds the CD light was ON during a 10 minute period (_not_
number of sucessfull packet decodes), and published that number as network
utilization telemetry along with their normal beacons.  Note the utilization
needs to be scaled up by approx 3x since 36% is considered the point of
saturation in Aloha type networks.

Wes
---
The world needs more geniuses with humility because there are so few of us
left.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tapr.org/pipermail/aprssig/attachments/20110307/d78441ca/attachment.htm>


More information about the aprssig mailing list