[aprssig] Linking digipeaters
Eric Hansen skyssx at gmail.comWed Mar 9 13:31:44 UTC 2011
- Previous message: [aprssig] Linking digipeaters
- Next message: [aprssig] Linking digipeaters
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
I could not be happier with my OTUSB and internal GPS module. I got a response to my e-mail at 10PM EST the day I received the pair. It works only about 5% of the time, but the problem is with my HT and a moderately crowded 4.39 in this area. In the next month or so, i'm going to hook it to a FT-2900 into a larsen 2/70NMO. I expect 100% performance then. On Wed, Mar 9, 2011 at 7:33 AM, Randy Love <rlove31 at gmail.com> wrote: > I had one of those. > It was the microTNC from the guys over in Greece that were working with > George, SV2AGW, of the AGWpe, AGWTracker fame. > > I spent $250 for it 3 years ago at Dayton. I was a tracker, KISS mode tnc, > and had on-board gps and battery, and a built-in USB interface. But, the > battery would never take charge, even when following their directions to the > T, and it would be very flaky to set using either the configuration software > or the command line prompts, which the command line prompts would have been > easier to deal with *if* the commands had been documented somewhere. > Responses to repeated efforts to get support were abysmal if they where > answered at all. > > That little thing has a slightly smaller form factor and similar case to > the OT+, but since I couldn't ever get the thing to take a charge ( wanted > to use it with an HT without having to have a power source for it ), it > spends it's time in a zip lock bag with its interface cable in a dark corner > of my operating desk as a reminder that sometimes you *don't* always get > what you pay for. > > That's why Scott's stuff and support are top of the world in my book. Sure, > he may have production delays of weeks or even months, but by gosh, if you > need help with it, even if it means replacement, he's there for you. > > Randy > WF5X > > > > _______________________________________________ > aprssig mailing list > aprssig at tapr.org > https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.tapr.org/pipermail/aprssig/attachments/20110309/f1213ef3/attachment.htm>
- Previous message: [aprssig] Linking digipeaters
- Next message: [aprssig] Linking digipeaters
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the aprssig mailing list
