[aprssig] APRS Radiation sensor
Bernard Van Haecke
bernard.vanhaecke at gmail.com
Tue Mar 22 20:06:11 CDT 2011
I built a telemetry station using an Arduino, RadioShield and GM counter and
put it on the
air recently. The charts can be seen at
I will put the source code via a link on my QRZ page as soon as I can FTP it
(for experimental purposes only!) Anyone is welcome to try it and run their
own telemetry station.
The 3 digits per channel in APRS telemetry packets sound sufficient to me.
If your CPM or
rate in uR/hr goes above 999 at any given ham shack location, chances
are your APRS station got
volatilized already and there is no life around for miles.
Accurate ratings in Sv units from a tube may not be obvious. The EPA itself
careful about it and uses CPM (particle count per minute) on their maps
instead of using
SI units. Also, tube readings can be relative to a lot of environmental
factors (not just
calibration). CPM alone is useful to watch trends though.
Note: this email may not be cross-posted to other lists, aliases, blogs,
tweets or the wild internet without permission.
On Tue, Mar 22, 2011 at 4:19 PM, Curt, WE7U <curt.we7u at gmail.com> wrote:
> On Wed, 23 Mar 2011, Guido Trentalancia wrote:
> If anyone has some sort of "clever" software then an automatic alert
>> (APRS bulletins, email, SMS) could be triggered for the Level 2 range
>> (steadily above 0.1 mSv/h).
> I'd be happy to add a script to do this, once people have detectors
> implemented that are feeding the internet stream.
> Curt, WE7U. http://www.eskimo.com/~archer
> APRS Usage Pages: http://wetnet.net/~we7u/usage.html
> aprssig mailing list
> aprssig at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig