[aprssig] APRS Radiation sensor

[jjesson at voyager.net]

 Sorry if  already mentioned but this was a very popular geiger counter a few years ago and I used it with my trusty (rusty?) HP95 DOS palmtop.  They have an  interesting web site on measuring and logging radioactive stuff:

http://aw-el.com/

73, Joe Jesson, KC2VGL


Sent via BlackBerry from T-Mobile

-----Original Message-----
From: jjesson at voyager.net
Date: Thu, 24 Mar 2011 05:10:06 
To: TAPR APRS Mailing List<aprssig at tapr.org>
Reply-To: jjesson at voyager.net
Subject: Re: [aprssig] APRS Radiation sensor


 Another source of geiger counters and test radioactive beads.  - I have the GM-10 and planning on writing some PIC code for an APRS integration project.
 
http://www.blackcatsystems.com/GM/vaseline_glass_bead.html

 Joe J.
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Patrick <winston at winston1.net>
Sender: aprssig-bounces at tapr.org
Date: Thu, 24 Mar 2011 00:33:32 
To: TAPR APRS Mailing List<aprssig at tapr.org>
Reply-To: TAPR APRS Mailing List <aprssig at tapr.org>
Subject: Re: [aprssig] APRS Radiation sensor

  Electronics Goldmine has Geiger counter kits on sale for $75, with 
tubes only in the 25-45 range.. the plus of the kit is the circuit has a 
led that flashes with each pulse so would be easy to tap for other 
purposes..

p

On 3/24/2011 12:12 AM, Scott Miller wrote:
> On 3/23/2011 9:07 AM, Julian, G4ILO wrote:
>> A lot of domestic hand-held radiation monitors such as are
>> manufactured in Ukraine have only an LCD readout. They are much
>> cheaper than the ones with computer interface. Is there any way that
>> they could be used? Could the system accommodate manually entered
>> readings?
>
> At the very least you can count pulses coming from the tube.  That 
> much of the design is common to any Geiger counter.
>
> I really wish I'd gotten around to making a kit of the counter I built 
> a few years ago, but even if I had I'd have sold out about 12 hours 
> into the crisis.  I've been getting inquiries non-stop since then.
>
> At some point I should be able to put out a sub-$100 counter as an 
> add-on to the ADS-WS1, and maybe a standalone device with USB output 
> too.  The limiting factor is the GM tubes, which I last saw quoted at 
> about $45 each in quantities of 100.  Smaller, less sensitive tubes 
> can be found for less.  Maybe I'll have to look to the Ukraine for 
> cheaper detectors.
>
> Scott
> N1VG
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>

_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig